MARTIN MACHINES Martin Machines T27 FleX Shaper (2024)

• Prev

  

• Next

  

Flexibility for today and tomorrow.

Setting up a spindle moulder is normally a big challenge. Not on the T27 FleX thanks to its modern touchscreen control: Through the integrated tool conversion you can also setup complex moulding patterns with tilted spindles in a instant. Only this enables the large tilting range of 2 x 46° to be used efficiently – and you can do it fully and completely to your inclinations. In addition the machine can be very precisely coordinated to your individual requirements in operation.

Precision and repetition accuracy as standard.

• The fence, which is guided on both sides, ensures the highest precision where it counts. In the basic version of the T27 it is set by hand wheel according to digital display in the control system, the motorised variants are completely electronically controlled. If the fence has to be removed from the machine table, perhaps for moulding at the ring fence, after reassembly thanks to the precise and reliable mechanical fits no more time consuming referencing is required.

Continuous distancing for perfect results.

• In order to close the gap between tool and table in the best way possible the electrically adjustable ring inserts represent the perfect solution. They are fully integrated into the control and facilitate the setup enormously. Through simple value specification the eccentric rings open or close the gap continuously. So already at the start of setup you don’t need to know, which fixed ring you have to insert in the table, but simply subsequently fit the gap quickly and easily. It could hardly be easier.

Robust, precise and durable construction.

• The machine frame is a stable, thick walled composite structure; a frame construction with a perfection that is only found in MARTIN products. The market is full of many manufacturers who call their frames "composite frames". However, if you take a closer look, you can quickly see that MARTIN is the only manufacturer of standard machines that actually uses the two materials, steel and concrete, in a genuinely composite structure. One component is worthless without the other – it's the intelligent combination that makes the first-class frame. With this frame, the customer gets the perfect base for excellent working.

Modern control for economic efficiency

• Through the consistent user-supporting modern control of the T27 the many mechanical goodies of this machine can be extremely effectively and economically implemented. Each T27 is equipped with a modern, intuitively operable touchscreen control system. Self-explanatory, coloured icons, easy to read text messages and the clear menu structure support even inexperienced users and ensure a first class work result. Up to six axes are clearly shown, and up to 1,000 tools and 1,000 programmes can be stored. All digital dimension indicators on the T27 always show the real dimension of the tool in relation to the table and the fence jaws. Once the tools or programmes are stored in the control system, they can always be called up again and so calculated. Selection is very simple thanks to a powerful search function.

Digital display of the infeed jaw position.

• The digital display gives you the option of making this setting quickly and very precisely according to the digital display. The crucial advantage is surely that you can also store the position of the electronically recorded cutting jaw position in the programmes. You can therefore use all the benefits of the control system, you only need to take care of the setting yourself manually via hand wheel as before.

Collision detection

• If, during the setup process, a tool is accidentally moved on a collision course, the machine, which Is equipped with continuous speed control detects this and warns the operator. This creates the highest degree of safety, even for inexperienced operators.

Collision avoidance

• The machine software prevents a collision between machine components (not tools) in the border areas of the travel paths of table rings and the spindle sleeve. This is a significant contribution to the value retention of the machine.

1. Manufacturer

   Martin Machines

2. Part Number

   MART27-FLEX

3. Manufacturer's Part

   T27-FLEX

4. Weight

   3,500.000 lbs

5. Sold in Multiples of

   1

6. Priced By

   Each

7. Preorder

   N

8. Product Type

9. Rangeof Speeds

10. Horsepower

11. Height

12. Width

13. Length

14. Phase

15. Power

16. Electrical Controls

17. Table Inserts (In.)

18. Reversible

19. Spindle Size Under Nut (In.)

20. Recommended Circuit Size (Amps.)

21. Table Travel (In.)

22. Maximum Diameter Cutter Above Table (In.)

23. Wiring Remarks

24. Table Opening

    255 | 205 | 161 | 106 | 74 mm

25. Maximum Diameter Cutter Below Table (In.)

26. Motor Phase

27. Router Bit Collet Included

28. Dust Collection Minimum CFM Required (CFM)

29. Fence Travel (Major and Minor) (In.)

30. Spindle Stroke

    150 mm

31. Motor Voltage (V.)

32. Table Size (In.)

33. Fence Size (L x H) (In.)

34. Dust Port Outside Diameter (In.)

35. Motor Current (Amps)

36. Maximum Spindle Diameter (In.)

37. Style (Type)

38. Spindle Pivot

    ± 46.00°

39. Spindle Travel (In.)

40. Digital Readouts

41. Prewired Voltage (V.)

42. Table T-Slot (In.)

43. Spindles Included

44. Sliding Table Size (In.)

45. Motor Power

46. Table Insert Opening Diameter (In.)

47. Table Height from Floor (In.)

48. Warranty

    5.0 kW | 6.0 kW

49. Control

    5.7" touchscreen

50. Control Panel

    at eye level, inclined, 2x rotation

51. Rotational Speeds

    3,000 | 4,000 | 5,000 | 6,000 | 8,000 | 10,000 rpm

52. Display Resolution

    0.05 mm | 0,01°

53. Repeat Accuracy

    ± 0.025 mm | ± 0,005°

54. Extraction Connections

    2 x 120 mm